"Your Satisfaction is our Highest Priority", contact us firstly if you have any question
The product can automatically manage the working of solar panel and battery in solar system. It is easy to set up and operate.
Features: --Automatically manage the working of solar panel and battery in solar system. --Overloading and short-circuit protection. --Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection. --Protection from lightning strike. --Prolong the battery life cycle and keep the load work well. --Easy to set up and operate. --Suitable for small solar energy system.
Note: <1>Make sure your battery has enough voltage for the controller to recognize the battery before first installation. <2>the regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries. <3>Let the children keep far away from the storage battery and the controller
Package List: 1 * Solar Charge Controller 1 * User's Manual Warranty: 18-month product guarantee from ALLPOWERS
Rated Discharge Current: 20A; USB Output Voltage: 5V/3A; Battery Voltage: 12V/24V auto. Adjustable power rate with dual USB ports; 4-Stage(EQU, Bulk, ABS, Float) charge management and 4-Stage PWM charge
Funtionality: Equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management
Mutiple electric protection: over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection
Good Heat Dissipation: Dual mosfet reverse current protection, low heat production
Easy to use: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc
Product Information Specifications for ALLPOWERS 20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V Below:
If you need to monitoring the solar system or setting the controller, you may have to buy a MT-50 remote meter separately. Description The Tracer-BN series controller is for off-grid solar system and control the charging and discharging of the battery. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over discharging. The battery charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults. In addition, the Tracer-BN series controller has a RJ45 interface to allow communication with other accessory. Technical Data Nominal system voltage: 12VDC / 24VDC Auto work Rated charge current:40A Rated discharge current: 20A Max. solar input voltage:150VDC Max. PV input po...
Magnum Energy ME & MS Series Battery Monitor Kit (ME-BMK)
Manufacturer: Magnum Energy
Brand: Magnum Energy
Battery monitor kit, MFG# ME-BMK, provides a fuel gauge style meter for your battery bank, monitors the battery bank & reports the state of charge, Amps, voltage, amp-hours in/out, and the minimum/maximum DC Volts. Includes module, cable & shunt.
SolarEpic MT-50 Remote Meter LCD Display Suitable for Tracer BN series MPPT Charge Controller
This MT-50 remote meter DOES NOT work with HQST / Renogy Commandar MPPT chargers This unit is compatible with LSxxxxB(P), VSxxxxBN and TracerxxxxBN(P) series controllers ONLY from EPsolar. Description MT-50, a new-generation remote display for Tracer xxxx BN controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of solar controllers. Technical Data Faceplate dimension:98Ã—98 mm / 3.86Ã—3.86 inch Frame dimension:114Ã—114 mm / 4.49Ã—4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20Â°C -- +70Â°C/-4Â°F -- 158Â°F
Mohoo 20A 12V 24V Auto Switch LCD Intelligent Solar Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation
Manufacturer: MOHOO Co.,LTD
Color: 20A Auto Solar Panel
Note: Please connect to the battery first and then the panel. Specification: Model: CMG-2420 Rated Discharge Current: 20A USB Output Voltage: 5V Total USB Output Current: 3A DC Output Voltage: 12V Total DC Output Current: 2A Over Load, Short Circuit Protection: 1.5 times by rated current Short Circuit Recovery Time: 10s Open Circuit Voltage of Solar Panel: 40V No load loss: 0.05W Over Voltage Protection: 15V;Ã—2/24V Float Chager Voltage: 14V;Ã—2/24V Discharge Recovery Voltage: 12V;Ã—2/24V Over Discharge Voltage: 10.5V;Ã—2/24V Control Mode: Software Intelligent Control Working Temperature: -35 Degree~+55 Degree Dimension(LÃ—WÃ—H): 135 X 100 X 30 mm Protection: 1. Over-load protection 2. Short circuit protection 3. Lightning protection 4. Under-voltage protection 5. Over-charging protection 6. Reverse Polarity protection Features: Wide LCD screen display With output switch, intelligent control, easy to operate. Power-efficient,Microcontroller digital accuracy PWM charging mode(SOC) Available...
You are buying the two cables. 1. Remote Temperature Sensor Model: RTS300R47K3.81A Acquisition of battery temperature for undertaking temperature compensation of control parameters Length: 3 M 2. USB to RS485 Converter Adapter Model: CC-USB-RS485-150U This adapter is used to monitor each controller on the network using Solar Station PC software and update the firmware.
All Power Supply PST-600-24 Pure Sine Wave Inverter 24 VDC- 600 Watts
Manufacturer: All Power Supply
Design Features: High efficiency. Low battery voltage alarm. Protections: input low voltage, input over voltage,over temperature, over load, short circuit. Low idle power draw. Built-in electronic GFCI. Optional remote control (sold separately): Model RC-15. Comes with pin-type battery cable lugs. OUTPUT: Power, Continuous 600 Watts. Power, Surge (for
Y-SOLAR 10A/20A 12V 24V Dual Battery Solar Charge Controller Duo-Battery Solar Controller For RVs Caravans and Boats (20A)
1. Protection: - Over charging - Short-circuit - Reverse polarity - Revert current to PV 2. Duo-Battery Controller Features: - Microcontroller Control for Fully Intelligent System - Utilizes Serial Mode PWM Control for Maximum Efficiency - Suitable for both 12V and 24V Systems - Temperature Compensation - Digital LED Indicator Light - Wide Temperature Working Range of -35c to 55c - Automatically Switches between 2 Batteries - Full Installation Instructions Included 3. Remote meter Features: - Remote digital display for the 10Amp/20Amp Duo- Battery Solar Charge Controller. - Ideal for monitoring and display current solar system status. - Displays both solar voltage and battery voltage as well as charging current and load current. - Shows Amp-Hour and Watt-Hour charge accumulation as well as percentage the batteries are charged. - Easy to use and program and is ideal for a quick system check. 4. Technical Information: Model No: EPIP20-dB EPIP20-dB: 12 VOLT or 12/24 VOLT auto work, 10 AMPS EPIP20-dB: 12 VOLT or ...
A high quality, reliable and economically priced charge controller from Morningstar. Features their advanced PWM pulse charging algorithm.
Other features include selectable battery type and temperature compensation.
The Sunsaver 6 is for 12V systems with a max. solar input of 6.5 amps. Dimensions 6" X 2.2", wt. 0.5 lb.
Model #: SS-6-12V
(low voltage disconnect): No
Vdc (voltage direct current): 12 V
Solar Amps: 6.5 A
Load Amps: 6 A
Weight: 1 lb./ .45 kg
Dimensions: 5.9" x 2.1" x 1.3" / 149.86 x 53.34 x 33.02 mm
Warranty info: 5 year warranty from manufacturer
Product performance: 1.This controller can control wind turbines for automatic charging battery. Under the condition of the battery is full of, through internal automatic control circuit to make the brakes, when the battery voltage drops to the recovery voltage, wind turbine back for battery charging, so as to protect the wind turbine and battery. 2.Comprehensive waterproof protection. This controller USES the seal completely waterproof design, all of them, and don't have to worry about air humidity, salinity, such as ground water use environment, protection grade reaches the IP67 above, even in water can normal use for a long time, improve the reliability greatly. Mode of connection: 1.Respectively connected to the battery "+" and "-" to the battery positive and negative terminal of the controller. 2.Respectively connect wind generators rectifier output anode and cathode side to the Wind Turbine input anode and cathode terminal of the controller. Note: 1.Confirm the rating of the wind generator output...