This 4 cell lithium ion battery protection board support over charging, over discharging, over current and short circuit protection.It has high working current up to 30A fit for li-ion lipo battery cell pack such as 18650,18550, 14500 avoiding the damage during charging or discharge then prolong their lifetime.
Specifications: Working temperature:-40~85? Overcharge Detecting voltage:3.9Â±0.025V Overcharge release voltage:3.8Â±0.05V Over discharge detecting voltage:2.30Â±0.08V Over discharge release voltage:2.70Â±0.1V Over current:20-30A Working Current:15A(need heatsink) Board Size:50 X 22 X 4mm/1.97 X 0.87 X 0.16inch(L*W*H)
"Your Satisfaction is our Highest Priority", contact us firstly if you have any question The product can automatically manage the working of solar panel and battery in solar system. It is easy to set up and operate. Features: --Automatically manage the working of solar panel and battery in solar system. --Overloading and short-circuit protection. --Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection. --Protection from lightning strike. --Prolong the battery life cycle and keep the load work well. --Easy to set up and operate. --Suitable for small solar energy system. Specification: *Voltage: DC 12V/24V *Self-consuming: 10mA *Rated Charge Current: 20A *Rated Load Current: 20A *Over charge Protection: 14.4V/28.8V *Over charge Floating charge: 13.7V/27.4V *Charge recover voltage: 12.6V/25.2V *Over discharge Protection: 10.7V/21.4V *Over discharge Recover: 12.6V/25.2V *USB output: 5V/3A *Operating temperature: -35Â¡Ã¦-60Â¡Ã¦ *Size:150 * 78 * 35mm / 5.9 * 3 ...
If you need to monitoring the solar system or setting the controller, you may have to buy a MT-50 remote meter separately. Description The Tracer-BN series controller is for off-grid solar system and control the charging and discharging of the battery. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over discharging. The battery charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults. In addition, the Tracer-BN series controller has a RJ45 interface to allow communication with other accessory. Technical Data Nominal system voltage: 12VDC / 24VDC Auto work Rated charge current:40A Rated discharge current: 20A Max. solar input voltage:150VDC Max. PV input po...
Magnum Energy ME & MS Series Battery Monitor Kit (ME-BMK)
Manufacturer: Magnum Energy
Brand: Magnum Energy
Battery monitor kit, MFG# ME-BMK, provides a fuel gauge style meter for your battery bank, monitors the battery bank & reports the state of charge, Amps, voltage, amp-hours in/out, and the minimum/maximum DC Volts. Includes module, cable & shunt.
SolarEpic MT-50 Remote Meter LCD Display Suitable for Tracer BN series MPPT Charge Controller
This MT-50 remote meter DOES NOT work with HQST / Renogy Commandar MPPT chargers This unit is compatible with LSxxxxB(P), VSxxxxBN and TracerxxxxBN(P) series controllers ONLY from EPsolar. Description MT-50, a new-generation remote display for Tracer xxxx BN controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of solar controllers. Technical Data Faceplate dimension:98Ã—98 mm / 3.86Ã—3.86 inch Frame dimension:114Ã—114 mm / 4.49Ã—4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20Â°C -- +70Â°C/-4Â°F -- 158Â°F
Mohoo 20A 12V 24V Auto Switch LCD Intelligent Solar Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation
Manufacturer: MOHOO Co.,LTD
Color: 20A Auto Solar Panel
Note: Please connect to the battery first and then the panel. Specification: Model: CMG-2420 Rated Discharge Current: 20A USB Output Voltage: 5V Total USB Output Current: 3A DC Output Voltage: 12V Total DC Output Current: 2A Over Load, Short Circuit Protection: 1.5 times by rated current Short Circuit Recovery Time: 10s Open Circuit Voltage of Solar Panel: 40V No load loss: 0.05W Over Voltage Protection: 15V;Ã—2/24V Float Chager Voltage: 14V;Ã—2/24V Discharge Recovery Voltage: 12V;Ã—2/24V Over Discharge Voltage: 10.5V;Ã—2/24V Control Mode: Software Intelligent Control Working Temperature: -35 Degree~+55 Degree Dimension(LÃ—WÃ—H): 135 X 100 X 30 mm Protection: 1. Over-load protection 2. Short circuit protection 3. Lightning protection 4. Under-voltage protection 5. Over-charging protection 6. Reverse Polarity protection Features: Wide LCD screen display With output switch, intelligent control, easy to operate. Power-efficient,Microcontroller digital accuracy PWM charging mode(SOC) Available...
You are buying the two cables. 1. Remote Temperature Sensor Model: RTS300R47K3.81A Acquisition of battery temperature for undertaking temperature compensation of control parameters Length: 3 M 2. USB to RS485 Converter Adapter Model: CC-USB-RS485-150U This adapter is used to monitor each controller on the network using Solar Station PC software and update the firmware.
All Power Supply PST-600-24 Pure Sine Wave Inverter 24 VDC- 600 Watts
Manufacturer: All Power Supply
Design Features: High efficiency. Low battery voltage alarm. Protections: input low voltage, input over voltage,over temperature, over load, short circuit. Low idle power draw. Built-in electronic GFCI. Optional remote control (sold separately): Model RC-15. Comes with pin-type battery cable lugs. OUTPUT: Power, Continuous 600 Watts. Power, Surge (for
Y-SOLAR 10A/20A 12V 24V Dual Battery Solar Charge Controller Duo-Battery Solar Controller For RVs Caravans and Boats (20A)
1. Protection: - Over charging - Short-circuit - Reverse polarity - Revert current to PV 2. Duo-Battery Controller Features: - Microcontroller Control for Fully Intelligent System - Utilizes Serial Mode PWM Control for Maximum Efficiency - Suitable for both 12V and 24V Systems - Temperature Compensation - Digital LED Indicator Light - Wide Temperature Working Range of -35c to 55c - Automatically Switches between 2 Batteries - Full Installation Instructions Included 3. Remote meter Features: - Remote digital display for the 10Amp/20Amp Duo- Battery Solar Charge Controller. - Ideal for monitoring and display current solar system status. - Displays both solar voltage and battery voltage as well as charging current and load current. - Shows Amp-Hour and Watt-Hour charge accumulation as well as percentage the batteries are charged. - Easy to use and program and is ideal for a quick system check. 4. Technical Information: Model No: EPIP20-dB EPIP20-dB: 12 VOLT or 12/24 VOLT auto work, 10 AMPS EPIP20-dB: 12 VOLT or ...
A high quality, reliable and economically priced charge controller from Morningstar. Features their advanced PWM pulse charging algorithm.
Other features include selectable battery type and temperature compensation.
The Sunsaver 6 is for 12V systems with a max. solar input of 6.5 amps. Dimensions 6" X 2.2", wt. 0.5 lb.
Model #: SS-6-12V
(low voltage disconnect): No
Vdc (voltage direct current): 12 V
Solar Amps: 6.5 A
Load Amps: 6 A
Weight: 1 lb./ .45 kg
Dimensions: 5.9" x 2.1" x 1.3" / 149.86 x 53.34 x 33.02 mm
Warranty info: 5 year warranty from manufacturer