Note: Please connect to the battery first and then the panel. Specification: Model: CMG-2420 Rated Discharge Current: 20A USB Output Voltage: 5V Total USB Output Current: 3A DC Output Voltage: 12V
Total DC Output Current: 2A Over Load, Short Circuit Protection: 1.5 times by rated current Short Circuit Recovery Time: 10s Open Circuit Voltage of Solar Panel: 40V No load loss: 0.05W Over Voltage Protection: 15V;Ã—2/24V Float Chager Voltage: 14V;Ã—2/24V Discharge Recovery Voltage: 12V;Ã—2/24V Over Discharge Voltage: 10.5V;Ã—2/24V Control Mode: Software Intelligent Control Working Temperature: -35 Degree~+55 Degree Dimension(LÃ—WÃ—H): 135 X 100 X 30 mm
Features: Wide LCD screen display With output switch, intelligent control, easy to operate. Power-efficient,Microcontroller digital accuracy PWM charging mode(SOC) Available for DC lamp and phone charging Use PWM&WPC mode, improve system efficiency and prolong the life span of the battery. Package included: 1 x Solar Charge Controller 1 x User Manual 2 x DC Cable
â˜† MOHOO Newest Simple Connections. More Professional,With output switch, intelligent control, easy to operate
â˜† Display More Information Than Others â˜† Power-efficient, Microcontroller digital accuracy
â˜†PWM charging mode(SOC). With separated temperature detected circuit, high precision temperature compensation function
â˜†Available for DC lamp and phone charging. Suitable for home, industrial, commercial etc. Dimension(LÃ—WÃ—H): 135 X 100 X 30 mm
You are buying the two cables. 1. Remote Temperature Sensor Model: RTS300R47K3.81A Acquisition of battery temperature for undertaking temperature compensation of control parameters Length: 3 M 2. USB to RS485 Converter Adapter Model: CC-USB-RS485-150U This adapter is used to monitor each controller on the network using Solar Station PC software and update the firmware.
All Power Supply PST-600-24 Pure Sine Wave Inverter 24 VDC- 600 Watts
Manufacturer: All Power Supply
Design Features: High efficiency. Low battery voltage alarm. Protections: input low voltage, input over voltage,over temperature, over load, short circuit. Low idle power draw. Built-in electronic GFCI. Optional remote control (sold separately): Model RC-15. Comes with pin-type battery cable lugs. OUTPUT: Power, Continuous 600 Watts. Power, Surge (for
Y-SOLAR 10A/20A 12V 24V Dual Battery Solar Charge Controller Duo-Battery Solar Controller For RVs Caravans and Boats (20A)
1. Protection: - Over charging - Short-circuit - Reverse polarity - Revert current to PV 2. Duo-Battery Controller Features: - Microcontroller Control for Fully Intelligent System - Utilizes Serial Mode PWM Control for Maximum Efficiency - Suitable for both 12V and 24V Systems - Temperature Compensation - Digital LED Indicator Light - Wide Temperature Working Range of -35c to 55c - Automatically Switches between 2 Batteries - Full Installation Instructions Included 3. Remote meter Features: - Remote digital display for the 10Amp/20Amp Duo- Battery Solar Charge Controller. - Ideal for monitoring and display current solar system status. - Displays both solar voltage and battery voltage as well as charging current and load current. - Shows Amp-Hour and Watt-Hour charge accumulation as well as percentage the batteries are charged. - Easy to use and program and is ideal for a quick system check. 4. Technical Information: Model No: EPIP20-dB EPIP20-dB: 12 VOLT or 12/24 VOLT auto work, 10 AMPS EPIP20-dB: 12 VOLT or ...
A high quality, reliable and economically priced charge controller from Morningstar. Features their advanced PWM pulse charging algorithm.
Other features include selectable battery type and temperature compensation.
The Sunsaver 6 is for 12V systems with a max. solar input of 6.5 amps. Dimensions 6" X 2.2", wt. 0.5 lb.
Model #: SS-6-12V
(low voltage disconnect): No
Vdc (voltage direct current): 12 V
Solar Amps: 6.5 A
Load Amps: 6 A
Weight: 1 lb./ .45 kg
Dimensions: 5.9" x 2.1" x 1.3" / 149.86 x 53.34 x 33.02 mm
Warranty info: 5 year warranty from manufacturer
Product performance: 1.This controller can control wind turbines for automatic charging battery. Under the condition of the battery is full of, through internal automatic control circuit to make the brakes, when the battery voltage drops to the recovery voltage, wind turbine back for battery charging, so as to protect the wind turbine and battery. 2.Comprehensive waterproof protection. This controller USES the seal completely waterproof design, all of them, and don't have to worry about air humidity, salinity, such as ground water use environment, protection grade reaches the IP67 above, even in water can normal use for a long time, improve the reliability greatly. Mode of connection: 1.Respectively connected to the battery "+" and "-" to the battery positive and negative terminal of the controller. 2.Respectively connect wind generators rectifier output anode and cathode side to the Wind Turbine input anode and cathode terminal of the controller. Note: 1.Confirm the rating of the wind generator output...
CoZroom LCD Solar Charge Controller/Regulator with Intelligent Dual USB Port, 20A 12V/24V
Color: black and blue
CoZroom LCD Solar Charge Controller/Regulator monitors the real-time currency, volt and electricity output volume of your solar panels, it works with all systems that have a power EMI indicator and are supplied with solar energy. CoZroom LCD Solar Charge Controller/Regulator automatically adjusts the most efficient charge parameters according to its surrounding temperatures and the power rate is easily adjustable. CoZroom LCD Solar Charge Controller/Regulator features a 4-stage charge period management (EQU, Bulk, ABS and Float) and charge loop improves the efficiency of charge and discharge and reduces heat consumption. CoZroom LCD Solar Charge Controller/Regulator has a LCD display which shows clear figures at night and its convenient load control mode can identify day and night for accurate numbers. Specifications: Size: 15cm x 7.8cm x 3.5cm Weight: 150g Working Temperature: -35Â°C to +60Â°C Color: Black and blue Maximum discharge current: 20A Maximum output voltage: 12V/24V Compatible Battery...
PAPACO 10A 12V 24V Solar Controller Charger, Duel Intelligent USB Port, DC Input, LCD Screen Display, Auto Switch, Overload Protection, Temperature Compensation
SPECIFICATIONS Color: Black Material: Plastic Voltage of Battery: 12V / 24V Automatic Rated Charge/Discharge Current: 10A USB Output Voltage: 5V Total USB Output Current: 3A DC Output Voltage: 12V Total DC Output Current: 2A Overload/Short Circuit Protection: 1.5 Times by Rated Current Short Circuit Recovery Time: 10s Open Circuit Voltage of Solar Panel: 40V No Load Loss: 0.05W Over Voltage Protection: 15V; x2/24V Float Charge Voltage: 14V; x2/24V Discharge Recovery Voltage: 12V; x2/24V Over Discharge Voltage: 10.5V; x2/24V Control Mode: Software Intelligent Control Working Temperature: -35~55Â°C Item Size: 135 * 100 * 25mm / 5.31 * 3.94 * 0.98in (L * W * H) Item Weight: 222g / 7.83oz PROTECTION Overload protection; Short-circuit protection; Lighting protection; Under-voltage protection; Over-charging protection; Reverse polarity protection. PACKING LIST 1 * Solar Charge Controller 2 * DC Cable 1 * User Manual(English)
Anself 10A 20A 12V/24V Solar Charge Controller with LCD Display Auto Regulator Timer Solar Panel Battery Lamp LED Lighting Overload Protection
This series solar charge controller is a kind of intelligent, multi-functional solar charge and discharge controller. All the controlling parameters can be reset flexibly to satisfy your different needs. Over-load and short-circuit protection. With dual USB 5V output. Specifications: Color: Black Material: Plastic Rated Voltage: 12V / 24V (Auto Switch) Max. Charge/Discharge Current: 10A / 20A (Optional) Max. Solar Panel Input Voltage: â‰¤50V Stop Charge Voltage: 14.7V/29.4V Low Voltage Recovery: 12.2V/24.4V Low Voltage Protection: 10.5V/21.0V USB Output Voltage/Current: 5V 2A No Load Loss: â‰¤10mA Temperature Compensation: -3mV/Cell/Â°C Operation Temperature: -20Â°C~60Â°C Item Size: 13 * 6.8 * 2.5cm / 5.12 * 2.67 * 0.98in Item Weight: 120g~152g / 4.23oz~5.38oz Package List: 1 * Solar Charge Controller 1 * User Manual (English)
It is ideal where a 12-volt low-power controller is needed. It can control up to 75 watts of PV module(s). Since it is epoxy encapsulated, it can be used outdoors in a harsh environment. Dimensions are 2.5" x 2" x 1.6" with wire leads for connecting module and battery. 5-year warranty.