WindyNation's P30L solar charge controller is a premium grade PWM solar controller. The digital display provides all necessary solar system information and also serves as a user interface for adjusting the charge controller's settings. It is the perfect solar charge controller for an RV, boat, small cabin or any other off-grid installation, where user configurability and system information is important.
WindyNation P30L PWM 30 Amp solar charge controller prevents battery from being overcharged and damaged by the solar panel. Ideal for 12 and 24 volt batteries. Controller can be configured for AGM, lead acid, gel and other battery types.
Advanced electronic protection: overload, short circuit, and reverse polarity protected
LCD digital display provides system information (amperage, voltage, temperature, load control etc.)
Battery temperature sensor (BTS) is included. See photo gallery.
System settings are user adjustable by using the MODE and UP and DOWN buttons
Product Information Specifications for P30L LCD 30A PWM Solar Panel Regulator Charge Controller with Digital Display and User Adjustable Settings Below:
Instapark INCC1205 12V / 5A Waterproof PWM Solar Charge Controller
Color: One Color
The Instapark INCC1205 solar charge controller is designed and engineered to prevent your 12V battery from overcharging when it's connected to a solar panel, therefore protect your investment and extend the battery life. The INCC1205 solar charge controllers is equipped with PWM technology to ensure that your battery reaches its maximum charging capacity without causing any damage to the battery. Similar to other modern high quality battery chargers, PWM algorithm gradually reduces the charging current to avoid over-heating of the battery, yet the charging continues to return the maximum amount of energy to the battery in the shortest time resulting in higher charging efficiency, faster recharging and a healthier battery at its full capacity. Each INCC1205 charge controller comes with four green LED indicators and one red LED indicator displaying battery status, connection status and real-time battery charge capacity. The INCC1205 solar charge controller is in full conformance with both CE and RoHS standard...
Specifications: Solar controller has specifically designed to meet the needs of the rural electrification market. Working Temperature: -35Â°C to +60Â°C Self consume: â‰¤10mA Float Charge: 13V(default,adjustable) Discharge stop:10.7V(default,adjustable) Discharge reconnect:12.6V(default,adjustable) Size:133x70x32mm LED display PWM battery charging All necessary protections equipped Adjustable controlling parameter of the system Suitable for Home, Industrial, Commercial etc. Note: 1.The function of the controller is to protect the voltage overshoot and discharge. 2.When the battery voltage is too low, the controller to stop output; after the solar panels charging, the battery will return to 12.6 v. It is a natural to output. 3.12.6 v is to restore the discharge voltage. 4.When the solar panels to recharge battery float charging voltage can be achieved. It will stop charging. This is called overshoot protection. 5. After the battery discharge, the battery outside will flash, this is to remind the user, ...
GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Intelligent Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation
What Makes GHB Solar Charge Controller Different! GHB solar charge controller adopts the advanced digital techniques and operates fully automatically. LCD screen display makes all much more clear. Use PWM&WPC mode, improve system efficiency and prolong the life span of the battery.It has various unique functions and quite easy to use. Speicifications: Overload/Short Circuit Protection: 1.5 Times by Rated Current Voltage of Battery: 12V / 24V Automatic Rated Charge/Discharge Current: 20A USB Output Voltage: 5V Total USB Output Current: 3A DC Output Voltage: 12V Total DC Output Current: 2A Short Circuit Recovery Time: 10s Open Circuit Voltage of Solar Panel: 40V No Load Loss: 0.05W Over Voltage Protection: 15V; x2/24V Float Charge Voltage: 14V; x2/24V Discharge Recovery Voltage: 12V; x2/24V Over Discharge Voltage: 10.5V; x2/24V Control Mode: Software Intelligent Control Working Temperature: -35~55Â°C Item Size: 135 * 100 * 25mm / 5.31 * 3.94 * 0.98in (L * W * H) Package List: 1 * Solar Charge Controller 2 * D...
12V / 24V 30 Amp PWM Solar Charge Controller For RVS
Manufacturer: Mighty Max Battery
Brand: Mighty Max Battery
Mighty Max Solar is excited to bring you this 12V 30 Amp charge controller deigned to be used with solar photo voltaic systems. This controller unit is designed for easy surface mounting on your RV, camper or garage walls. MLS-12V30ALCD is a highly efficient PWM charge controller which increases battery longevity by regulating the charge flowing from the solar panels to the battery bank. An easy to read LCD screen displays system operation information and data. Alongside the LCD screen are two readily available USB ports for your convenience. Â For optimal performance out of your charge controller be sure to use it with a Mighty Max Solar Panel and Mighty Max Battery.Â Genuine Mighty Max battery Product
Logisaf 30A 12V/24V Solar Controller LCD Solar Panel Regulator Charge Controller Dual USB Port
Manufacturer: Cloud Mall
Color: Blue, Black
Specifications: Solar controller has specifically designed to meet the needs of the rural electrification market. PWM Battery Charging 2 USB Charge port: 5V 3A Working Temperature: -35Â°C to +60Â°C Self consume: ?10mA Float Charge: 13V(default,adjustable) Discharge stop:10.7V(default,adjustable) Discharge reconnect:12.6V(default,adjustable) Size:133x70x32mm LED display PWM battery charging All necessary protections equipped Adjustable controlling parameter of the system Suitable for Home, Industrial, Commercial etc. Note: 1.The function of the controller is to protect the voltage overshoot and discharge. 2.When the battery voltage is too low, the controller to stop output; after the solar panels charging, the battery will return to 12.6 v. It is a natural to output. 3.12.6 v is to restore the discharge voltage. 4.When the solar panels to recharge battery float charging voltage can be achieved. It will stop charging. This is called overshoot protection. 5. After the battery discharge, the b...
ENZPOWER 1000W MPPT Wind Solar Hybrid Controller 600W Wind + 300W Solar 12v/24v Auto Distinguish
ENZPOWER 1000W MPPT Wind Solar Hybrid Controller 600W Wind + 300W Solar 12v/24v Auto Distinguish Features â˜…Intelligent design, simple structure, control powerful, stable performance, safe and reliable products. â˜… Digital intelligent control. Having a boost function, MPPT function, make better use of wind energy â˜…Wind MPPT charging, charging efficiency than conventional PWM way more advantages â˜… LCD Display all parameters visible and intuitive user â˜… PWM stepless unloading mode â˜… Various output status setting function, often power / half power / sub-periods, etc. â˜…Max.input power: 600W Wind + 300W Solar â˜…Rated voltage ï¼š12V /24V â˜…Net Weight:2.2KG â˜…Size(L*W*H): 164Ã—181Ã—100(mm) â˜…Enclosure: IP30 Electronic protections: Lightning protection, solar cells, anti-anti-charge protection Battery open-circuit protection Battery reversal protection Overload protection. Over speed and over-voltage soft automatic brake protection Package ...
ZHC Remote Monitor Meter App Controller for Epever Tracer Series MPPT Solar Charge Controller (Bluetooth-Box)
Control your Solar Controllers and Inverters By Phone and Tablet eBox-BLE-01 is a kind of serial adapter which can make our EPSolar's solar Controller and inverter be with Bluetooth communication function, and carry out wireless monitoring, parameter settings, and etc. for the system only by cooperating with mobile phone APP. Visit EPSolar Website, Download the APP, Only Support Android for the Moment Specifications Model: eBox-BLE-01 Input Voltage: 5V DC (via RS485 port) Standard Power Consumption: 0.04W Operation Power Consumption: 0.05W Communication Distance:
"Your Satisfaction is our Highest Priority", contact us firstly if you have any question The product can automatically manage the working of solar panel and battery in solar system. It is easy to set up and operate. Features: --Automatically manage the working of solar panel and battery in solar system. --Overloading and short-circuit protection. --Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection. --Protection from lightning strike. --Prolong the battery life cycle and keep the load work well. --Easy to set up and operate. --Suitable for small solar energy system. Specification: *Voltage: DC 12V/24V *Self-consuming: 10mA *Rated Charge Current: 20A *Rated Load Current: 20A *Over charge Protection: 14.4V/28.8V *Over charge Floating charge: 13.7V/27.4V *Charge recover voltage: 12.6V/25.2V *Over discharge Protection: 10.7V/21.4V *Over discharge Recover: 12.6V/25.2V *USB output: 5V/3A *Operating temperature: -35?-60? *Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in Note: ...
ZHC MPPT Solar Charge Controller 40A+MT50 Monitor+Temp.Sensor
Why buy together: We find that 60% of our customer buy the MT50 Monitor and Temperature Sensor separately after bought the Controller. that's why we release this kit, bring more convenience to our customer. In the Package: 1Ã—40A MPPT Solar Charge Controller, 1Ã—MT50 Remote Monitor, 1Ã—Temperature Sensor Specifications: â€¢ Charge Control Mode: Â Â MPPT â€¢ Nominal System Voltage: Â Â 12/24V DC Auto â€¢ Rated Charge Current: Â Â 40A â€¢ Battery Voltage Range: Â Â 9V~32V â€¢ Max.PV Open Circuit Voltage: Â Â 100V DC â€¢ Max.PV Input Power: Â Â 12V/520W,24V/1040W â€¢ Self-Consumption: Â Â