Small (53x30x3mm) Solar Cell capable of charging a battery to power a motor, light bulbs and LEDs, etc. Great for DIY projects, solar walkway lamp repair, etc. Applications: - SMALL HOME PROJECTS - SCIENCE PROJECTS - ELECTRONIC APPLICATIONS - CHARGING SMALL DC BATTERIES - BUILD YOUR OWN SELF POWERED MODELS / TOYS / SOLAR DISPLAYS. Performance parameters: Operating Voltage: 5V Working Current: 30mA Peak Power: 0.15W Size: 53mm *30mm*3mm Need more than 1? See our 4 pack, Search for ASIN B01DCNSZBC Prefer the same cell with pre-soldered wires? Search for ASIN B06XTW7QS3
Solar Cell capable of charging 3.6-3.7 V Battery (Coin Cell, AA, AAA, etc)
Great for science projects, electronic applications, charging batteries
Easy solder anode and cathode
Operating Voltage: 5V, Working Current: 30mA, Peak Power: 0.15W, Output Voltage: charge for 3.6 - 3.7V Battery
Product Information Specifications for AMX3d 5V 30mA Micro Mini Power Solar Cells For Solar Panels, (53X30mm) Below:
Amtrak Solar Attic Fan, 35 Watt Solar Panel, High Efficiency Fan Blades
Manufacturer: Amtrak Solar
Brand: Amtrak Solar
For any solar fan to perform well it will need power from solar panel. If the solar panel is low wattage the fan motor will not get enough power to run the fan. Amtrak solar provides 35 watt high quality crystalline solar panel unlike competitors which offer only 13 watts solar panel. This fan it could be installed in the gable vent or anywhere in attic. This is a 12 volt DC fan configured to work with solar panel. It has high efficiency fan blades for best performance. Fan turns on as soon as the sunlight hits the solar panel and runs all day. Keeps the house cool and ventilated with fresh air circulation all day. Do not need to make holes in the roof to install solar fan it can be installed in gable vent. No need of electricians, no permits, no inspections. Wiring is quick and easy. Cubic feet per minute on the fan is 1750. Solar panel generally produce power for over 30 years. Solar panels comes with 4 mounting brackets for solar panel. Instructions are included. 15' feet of wire included with quick connec...
Manufacturer: MidNite Solar
Brand: MidNite Solar
MidNite Solar breakers are built to provide protection to break the full rated energy load at the rated voltage with no system damage. Always use the appropriate sized breaker for electrical systems to ensure long term system life. MidNite Solar manufactures and develops long lasting breakers for protecting home solar panels or commercial solar panels. Features: MNEPV60 150VDC din rail mount breaker 60 Amp Box size 13mm wide.
Panel Clamp assembly for Heliocol Swimming Pool Solar Panels - HC-113
This breakthrough plastic polymer clamp is used to connect heliocol and sunstar solar swimming pool heating panels. This durable, specially-engineered clamp never requires replacement and never needs to be tightened. The panel clamp allow panels to be mounted closer together for a more attractive and more efficient system with no wasted space. Part number - hc-113
Adjustable Solar Panel Mount Mounting Rack Bracket Set Folding Tilt Legs, Boat, RV, Roof Off Grid,22-inch Length
Manufacturer: Link Solar
Brand: Link Solar
NOTE:The rail may be tilted to face in either direction. Place support legs as need for desired angle of the PV modules.Securely fasten all hardware. It is especially designed for solar systems,can be used on RV,MARINE,MOTORHOME,roofs, sheds, garages or other flat surfaces to tilt solar panels,or ground.
Description: This product is a part of Renogy Rail Mount System. Renogy Rail Mount System is designed to support on-grid and off-grid systems, as well as all Renogy panel sizes. To complete this system, you would also need L-Foot, End Clamps, and Mid Clamps (sold separately). It makes the installation of long, continuous rows of panels easy. The Rail Mount System supports any row length required for a project. The system is designed to be used on flat, rigid surfaces to ensure system stability. Recommended Tools (Not Provided): â€¢ Socket Wrench â€¢ Tape Measure and Protractor â€¢ 6mm Hex key â€¢ Chalk snap line Please Note: This item is not structural or UL certified. If you have any questions regarding this product, please give us a call at 1 (800) 330-8678 or email firstname.lastname@example.org. Specifications: Two Renogy 5Ft Roof Mounting Aluminum Rails Material: Aluminum 6063 Surface Roughness: B, C Wind Speed: â‰¤ 60m/s Snow Load: â‰¤ 1.4KN/m2 Renogy Mounting Rai...
Unlimited Solar 15 Amp MC4 Style Solar Panel In-Line Diode Connector - IP 67 Rated
Manufacturer: Unlimited Solar
Brand: Unlimited Solar
Can be used for connecting solar panels and installed in large roof or ground.Maximum current allowed through connectors is 15A.Easy , quickly and reliable connection of the solar cables to the photovoltaic system (solar panels, converters). With Built in 15 Amp protection Diode.
BTSKY Y Branch MC4 1 Male to 4 Female (M/FFFF) and 1 Female to 4 Male (F/MMMM) Solar Panel Cable Connectors
These are Y Type(1 to 4) MC4 Style Branch Connector Cables which are approved by CE, TUV. This Y Style MC4 compatible Solar Cable Connector Set is a perfect solution to parallel connect multiple panels together in a solar field, and is typically used in parallel applications. Feature: -1 Pair of Y Type(1 to 4) MC4 Solar Panel Cable Connectorsï¼š1 male to 4 female(M/FFFF) and 1 female to 4 male(F/MMMM) -Compatible Mc4 -Double seal rings for better waterproof effect -Compatible with PV cables with different insulation diameters -It can be used in harsh environment -With excellent aging resistance and UV endurance -Created seal, design of dust proof -Load capability with big current and high voltage -Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument -Strong pulling force capability -Resistance of extra high & low temperature and fireproof -Lower contact resistance Specification: -main cable specificationï¼š6mm2(AWG10) -Branch cable spec...